%P30 (ELAP7)
;THREE PHASE SINGLE CUT END OVERLAP DDGap, Butt2 Section Unicore.
;This is the Core Definition Program generated by the operator
;Core Dimensions
N010 SET H00=100000     ;WL in microns
N020 SET H01=80000      ;WW in microns
N030 SET H03=50000      ;BUP in microns
N035 SET H79=50000      ;Strip Width in microns
N038 SET H78=1          ;Numbers of strips in machine
N039 SET M21=1          ;Side Cut WL = 0
                        ;End Cut WW = 1
N040 SET M22=1          ;45 deg corner = 0  
                        ;30 deg corner = 1
N050 SET H66=3          ;Number of overlaps on inner cores
N055 SET H67=8          ;Number of overlaps on outer core
N060 SET H04=3000       ;Set inner corner radius (microns)
N070 SET H44=0          ;Set space between inner cores (microns)
N080 SET H45=0          ;Butt Outer build up (microns) No Butt=0
N090 SET H48=30         ;Butt Outer Cut position % (10-50%)
N120 SET H02=270        ;Strip Thickness (ST) in microns
N130 SET H06=0          ;Tightness Factor +ve is looser, -ve tighter
N140 SET H34=0          ;Specify Restart BUILD-UP microns
N142 SET H40=1          ;Restart core number (1, 2 or 3)





N150 SET M20=1   ;DO NOT CHANGE
N160 SET M18=1   ;DO NOT CHANGE
N200 JMP P41     ;DO NOT CHANGE

END