%P30 (ENDOLAP7)
;SINGLE PHASE END OVERLAP DDGap with Overlap Spread & BUTT Outer.
;This is the Core Definition Program generated by the operator
;Core Dimensions

N010 SET H00=100000     ;WL in microns
N020 SET H01=50000      ;WW in microns
N030 SET H03=20000      ;BUP in microns
N035 SET H79=50000      ;Strip Width in microns
N038 SET H78=1          ;Numbers of strips in machine
N039 SET M21=0          ;Side Cut WL   = 0  
                        ;End Cut WW    = 1
N040 SET M22=0          ;45 Deg Corner = 0  
                        ;30 Deg corner = 1
N050 SET H66=6          ;Number of overlaps before repeating 
N055 SET H67=0          ;Overlap spread (microns) Full Spread = 0
N058 SET H45=3000       ;Butt Outer build up (microns) No Butt = 0
N059 SET H48=30         ;Butt Outer Cut position % (10-50%)
N060 SET H04=3000       ;Set inner corner radius (microns)
N120 SET H02=296        ;Strip Thickness (ST) in microns
N130 SET H06=0          ;Tightness Factor +ve is looser, -ve is tighter
N140 SET H34=0          ;Specify Restart BUILD-UP microns









N150 SET M20=1   ;DO NOT CHANGE
N160 SET M19=1   ;DO NOT CHANGE
N200 JMP P41     ;DO NOT CHANGE
END