%P30 (COREGAP7)
;Rectangular Unicore SINGLE GAP
;This is the Core Definition Program generated by the operator
;Core Dimensions
N010 SET H00=120000     ;WL in microns
N020 SET H01=80000      ;WW in microns
N030 SET H03=10000      ;BUP in microns
N035 SET H79=50000      ;Strip Width in microns
N038 SET H78=1          ;Numbers of strips in machine

N040 SET M20=1          ;90deg corner = 0     45 deg corner = 1
N050 SET M21=0          ;Side Cut WL   = 0    End Cut WW    = 1
N060 SET H69=5000       ;Set Gap in microns
N090 SET H04=3000       ;Set Corner in microns
N100 SET H05=20         ;Set cut position as percentage of WL
N120 SET H02=270        ;Strip Thickness (ST) in microns
N130 SET H06=0          ;Tightness Factor +ve is looser, -ve tighter
N140 SET H34=0          ;Specify Restart BUILD-UP microns





N150 SET H20=0          ;DO NOT CHANGE
N160 SET M06=1          ;DO NOT CHANGE
N200 JMP P41            ;DO NOT CHANGE

END