%P30 (MINI-D7)
;SINGLE CUT MINI-D Distributed Gap Unicore
;This is the Core Definition Program generated by the operator
;Core Dimensions
N010 SET H00=120000     ;WL in microns
N020 SET H01=80000      ;WW in microns
N030 SET H03=10000      ;BUP in microns
N035 SET H79=50000      ;Strip Width in microns
N038 SET H78=1          ;Numbers of strips in machine
N040 SET M20=1          ;Square Corner = 0 (90 deg)
                        ;Angled Corner = 1 (45 deg)
N045 SET H04=3000       ;Set inner corner radius (microns) 
N050 SET H66=4          ;Initial number of overlaps before repeating
N060 SET H68=1          ;Number of lams per overlap
N065 SET H20=4000       ;Lamination Overlap in microns. Normally 1000-5000
N100 SET H05=8          ;Set cut position as percentage of WL
N120 SET H02=270        ;Strip Thickness (ST) in microns
N130 SET H06=0          ;Tightness Factor +ve is looser, -ve tighter
N140 SET H34=0          ;Specify Restart BUILD-UP microns





N150 SET M22=0          ;DO NOT CHANGE
N160 SET M03=1          ;DO NOT CHANGE
N200 JMP P41            ;DO NOT CHANGE

END