%P30 (DDGAP7)
;SINGLE CUT Doubly Distributed Gap with BUTT Outer Unicore
;This is the Core Definition Program generated by the operator
;Core Dimensions
N010 SET H00=159000      ;WL in microns
N020 SET H01=50000      ;WW in microns
N030 SET H03=52000      ;BUP in microns
N035 SET H79=30000      ;Strip Width in microns
N038 SET H78=1          ;Numbers of strips in machine
N039 SET M21=0          ;Side Cut WL  = 0   End Cut WW = 1
N040 SET M22=0          ;45 deg corner = 0   30 deg = 1
N045 SET H04=3000       ;Set inner corner radius (microns)
N048 SET H67=70000          ;Overlap Spread (microns)  Full Spread=0
N050 SET H66=5          ;Number of overlaps before repeating
N060 SET H68=3          ;Number of lams per overlap
N070 SET H45=0          ;Butt Outer Build (microns)  No Butt=0
N080 SET H48=30         ;Butt Outer Cut position % (10-50%)
N100 SET H05=18         ;Set cut position as percentage of WL
N120 SET H02=295        ;Strip Thickness (ST) in microns
N130 SET H06=0          ;Tightness Factor +ve is looser, -ve tighter
N140 SET H34=45500          ;Specify Restart BUILD-UP microns





N150 SET M20=1          ;DO NOT CHANGE
N160 SET M08=1          ;DO NOT CHANGE
N200 JMP P41            ;DO NOT CHANGE

END