%P30 (ECORE7)
;E Core Unicore Cut on WW or WL
;This is the Core Definition Program generated by the operator
;Core Dimensions
N010 SET H01=120000     ;WL in microns
N020 SET H00=80000      ;WW in microns
N030 SET H03=20000      ;BUP in microns
N035 SET H79=50000      ;Strip Width in microns
N038 SET H78=1          ;Numbers of strips in machine
N045 SET M22=1          ;45 DEG corner = 0
                        ;30 DEG corner = 1
N048 SET M21=0          ;Cut on Window Width  = 0
                        ;Cut on Window Length = 1
N050 SET H66=3          ;Number of overlaps before repeating
N060 SET H68=2          ;Number of lams per overlap
N065 SET H20=15000      ;Lamination overlap in microns
N100 SET H05=7          ;Set cut position as percentage of WL or WW
N120 SET H02=270        ;Strip Thickness (ST) in microns
N130 SET H06=0          ;Tightness Factor +ve is looser, -ve tighter
N140 SET H34=0          ;Specify Restart BUILD-UP microns
N145 SET H40=1          ;Restart core number (1, 2 or 3)







N150 SET M20=1          ;DO NOT CHANGE
N160 SET M09=1          ;DO NOT CHANGE
N200 JMP P31            ;DO NOT CHANGE (CAL6 routine not CALC7)

END